Make sure you to schedule a rephasing of the crankshaft sensor by having the dealer perform an OBD Misfire Monitor Neutral Profile Correction. You cannot drive the car far without it as it will pop, crackle, and backfire. It is easily corrected in less than 10 minutes, however, these cars are relatively new and most dealer techs are not familiar with the process, so have some patience. We didn’t have the proper clutch-alignment tool available at the time of our swap. If you pick up a 26-spline unit from the parts store, you will notice the shaft is too small. We wrapped tape around it until it fit snugly in the pilot bearing. Tighten the pressure plate bolts evenly, torquing them to 46 in-lb.