Twin Screw Supercharger Install Kenne Boss 017
|
Pulley changes—in this case, from 4.00 to 3.50 inches (and eventually 3.25-inch)—are easily handled using Kenne Bell’s Bell Pulley Wrench, which locks into the two small holes in the face of the pulley, and a hex wrench to remove the single bolt that secures the wheel. Mammoth twin screws can be used with pulleys that range in sizes starting at 4 inches and work down (in 1/8-inch increments) to 2.75 inches. View Related Article
|
|
|
|