Related Photo Galleries
The sweet part of the FRPP Control Pack is that is enables you to run a return-style fuel system. That means we can run our factory fuel system, provided we have sufficient flow to feed the engine accordingly. More on that part in a minute, but for fuel rails Jake wanted to use Steeda Autosports Two-Valve fuel rails. His idea was to make custom brackets to bolt onto the engine itself. One can use the stock fuel rails, but we wanted to make sure we had optimal flow. Here you can see the custom brackets welded to the Steeda fuel rails prior to permanent mounting. The engine comes with stock rails and injectors, and since we weren’t going the power adder route, we stuck with the stock injectors.