Edelbrock supplied its excellent Performer RPM II intake and 70mm throttle body and EGR spacer. These are CARB E.O. numbered parts, which is important to us, and prior testing has shown this is a good bolt-on 5.0 intake. The intake is available in light gray/aluminum or black, and you can see how we rolled. You'll need to either reuse your original intake bolts (more parts to clean) or get new ones. The RPM II does not provide a mount for the 5.0's two bulky electric harness connectors as the stock intake does, so stuffing the harness connectors under a rear intake runner and tying them in place is necessary.