Mustang50 Magazine Homepage 5.0 Mustang & Super Fords

Fox Mustang Bolt Ons Intake Swap

Prev Next
Marking the rotor's position at top dead center is an important disassembly procedure when you're swapping camshafts and intake manifolds. The distributor must be removed unless you're only changing the intake manifold. Making this reference ensures the distributor is reinstalled at the same position in the timing sequence, and the engine should fire right up.
Fox Mustang Bolt-Ons - Stout Steel

 Marking the rotor's position at top dead center is an important disassembly procedure when you're swapping camshafts and intake manifolds. The distributor must be removed unless you're only changing the intake manifold. Making this reference ensures the distributor is reinstalled at the same position in the timing sequence, and the engine should fire right up.  View Related Article

 

Get Adobe Flash player

Car Research Guide