Mustang Seatbelts - CG-Lock Lap Belt Cinch
With the clamp plate secured, we remove the unit's slide cover and lay the shoulder-belt webbing across the top of the knurled roller that lies inside the CG-Lock's body. When this is done, the slide is reinstalled. Make sure the finger-grip bar on the slide is pointed toward the seatbelt's tongue. If it isn't, the cover must be turned around before trying to use the CG-Lock. Engaging and disengaging the device is as simple as pressing a small thumb lever downward (which releases the slide's grip on the webbing), then moving the slide either forward or backward in an even motion (follow the "On" and "Off" arrows). Detents on each side of the chassis prevent moving the cover too far.
View Related Article
|
|