Horse Sense:
Combine California's strict emissions testing on newer cars and its benign, nearly rust-free climate, and you end up with a healthy population of nearly 40-year-old hot rods. In the Golden State, deep-breathing '60s Mustangs are not uncommon, and old Foxes never die.
At the heart of the CARB-exempted...
At the heart of the CARB-exempted engine package is this Coast High Performance 347-E Street Fighter short-block. While looking a bit bare compared to the complete engine, the 347-E retails for $2,899, which allows financial wiggle room for a front cover, a harmonic damper, and so on. Coast can supply all such parts if a single bill and reduced shopping time are desirable.
Admittedly, many 5.0 Mustang & Super Fords readers rate emissions compliance up there with flossing every night. It's the right thing to do, but no one really seems to care if you don't.
We can assure you that while our California readers don't floss any more than anyone else, they do stick much closer to emissions compliance. While we'd like to think the oppressive brown pall hanging over the Los Angeles basin has jump-started Californios civic sense, in reality it's the specter of governmental coercion that has turned opinion from evasion to compliance with the smog laws. Having to chassis dyno your Mustang for the state with a sniffer up its tailpipe every other year is a great motivator, after all.
Frankly, most longtime residents of the Golden State are, in the final reckoning, happy enough to have emissions testing. It's a pain, it's expensive, it's a definite crimp on automotive enthusiasm, but being able to breathe and seeing trees with leaves on them is nice too.
There's no law against dressing...
There's no law against dressing up emissions-legal engines, and Coast High Performance didn't spare the eye-candy when dolling up its project 347-E. With a guesstimated 400 hp (we hope to have dyno numbers later), it's definitely a good-looking engine. The polishing is a $799.99 option from Coast when applied to the heads, intake, water pump, and alternator.
And it can also be good for business. Mark O'Neil, the big piston at Coast High Performance, has long offered a CARB-exempted 347 Street Fighter 347-E short-block for those wanting to do things the right way. Unremarkable from other 347s in most respects, the 347-E's big emissions' stick is its camshaft-it's key to making the -E engine both powerful and emissions legal.
As with all EFI camshafts, the Pro Mustang 4018 hydraulic roller Coast uses employs a 112-lobe separation angle to ensure adequate manifold vacuum. That's also a sign that driveability ought to be reasonable, and it is. The valve lift is 0.510/0.534 inch, while duration is a reasonable 222/232 degrees at 0.050 inch valve lift. Such specifications may not raise a drag racer's pulse, but they are definitely healthy for something you want to drive onto the emission inspector's dyno. We've made 425 hp with less cam and Z304 cylinder heads on our 347 Street Fighter dyno mule, so this bumpstick is clearly way out in front of an E303. And if you want just the cam, Pro Mustang has it for $189.99.
The pistons are also important to the 347-E meeting its emission goals. Coast uses its in-house Probe pistons-naturally-this time with a slight dish for compression compliance and a smooth flame front.
Coast uses all-new parts in...
Coast uses all-new parts in its short-blocks and engines, including stock replacement blocks in the 347-E. The minute clearancing required for the 347 stroke at the bottom on the cylinder bores and around the oil-pump boss are done on CNC machines, along with the rest of the block machining steps.
These days, maximum displacement...
These days, maximum displacement in a small-block is as easy as reaching for a 3.400-inch stroker crank. Coast uses a variety of these-this one is from SCAT and will easily support 500 hp.
Coast has crankshafts in either...
Coast has crankshafts in either 28- or 50-ounce balances. That allows them to match varying parts availability, early and late Mustang dampers, and the resulting three- or four-bolt patterns for the pulleys. Drilled like Texas oil country, the project engine's crank is a 50-ounce unit