5.0 Mustang & Super FordsHow To Engine
Modotek ECU - Project Cheaper Sleeper - Black Ops
Putting Modotek’s new ECU to the test on the street, dyno, and dragstrip
In our last report on Project Cheaper Sleeper ("Spoiler Alert," May '13), we detailed all of the undercover changes that Rocco Acerrio (A.R.E. Performance & Machine) and Stevie Morrow (Stevie's Garage) made on the virgin-stock '91 Mustang LX (5.0/AOD). This time around we are highlighting several cool concepts that were implemented in the 'Stang's makeover. However, one component that was added—Modotek's BlackBox v2.0 ECU—stands out among the project's headlining upgrades.
Call it perfect timing, as we received word of the BlackBox v2.0 just a few days after your scribe assumed ownership of the project Fox for $1,000. Shortly thereafter the idea of installing a low-dollar EFI 331/nitrous combination under its hood spawned. When weighing the options of how to control the engine package, we knew the Modotek ECU would be perfect for bringing our Pony's 331 stroker to life and dialing-in its performance on the street, strip, and chassis dyno.
In the old days, once performance mods went beyond adjusting timing and fuel pressure, it was time to tune EEC-IV engine management with a chip. These chips are small data modules that contain programmed timing and fuel commands that override the stock programming for a modified 5.0. They plug directly into a PCM's circuit board. While effective, chips are old news because they are fixed calibrations that cannot be manipulated on the fly.
Through the years, piggyback processors were a saving grace, of sorts, for street Ponies making big steam. Of course, the next level on all of the aforementioned tuning variants are the various stand-alone systems. While any of these systems can be used for moderate-performance applications, like our project car, they're a lot more elaborate than we really need. Typically such systems are used for high-powered Mustangs loaded with race parts.
There's one thing that we said about BlackBox v2.0 in our last report that definitely deserves repeating here: Many of the standalone systems, while excellent, are often a bit too advanced for some setups. Modotek addressed cost (the basic BlackBox v2.0 system is only $1,349) and user-friendliness head on by designing the first plug-and-play management system for EFI Foxes that connects directly (one-to-one) into a stock wiring harness. Furthermore, it allows users to precision-tune engines and power-adder systems (using a laptop) for maximum performance, the same way it's done with a stand-alone system that requires all-new wiring.
Enough about its potential. Let's get down to how it installs, and more importantly, how well it works on Cheaper Sleeper.
Horse Sense: We hope after reading this, you'll head down to your local newsstand and pick up a copy of our annual special issue, 1979-2013 Mustang Performance. This year, instead of focusing on one particular platform or year range of Mustang, we're bringing you a magazine filled with features and killer tech ideas that follow a budget-build theme. Look for copies on your favorite mag rack starting August 18, and drop us a note on Facebook or send a Tweet to let us know what type of Mustang projects you're working on.
On the Dyno
The break-in period (approximately 300 miles of road testing) for Project Cheaper Sleeper's new bullet allowed your tech editor and tuning wizard Brian Macy of Horsepower Connection to work with the new Modotek BlackBox v2.0 engine-management system. This affordable ($1,349) plug-in ECU can use short-term and long-term fuel trims to determine the amount of fuel correction necessary for achieving a targeted air-fuel ratio (13.97 for cruising).
In the tuning world, the short-term fuel trim is the amount of fuel that the O2 sensor is allowed to change instantly, while the long-term trim is fuel values that are stored in another table and applied to a calibration by the tuner when and where desired or necessary in the map.
We actually started calibrating with the basic 5.0 startup tune programmed in the BlackBox v2.0 by the factory, and used the unit's Closed-Loop, Long-Term Factor Table (or in basic terms, the "learning option") to help get our fuel map in check rather quickly while driving down the highway. One of the neat things about this system is that (with a laptop, of course) you can watch this table real time to see how far off you are in your tune and apply changes to the whole table or just small sections.
While everything went well with achieving great driveability, we were anxious to strap our Mustang on the rollers of GTR High Performance's Dynojet chassis dyno to see how the ECU would measure up when it was time to calibrate the engine for power, naturally aspirated and with a hit of spray from the Nitrous Oxide Systems plate that is secretly swedged between the 331's upper and lower intake plenums.
We made several runs, steadily changing values in the PCM's Base Fuel Table until air/fuel ratio matched the target we set in the Closed-Loop Table. Once that was achieved, we experimented with the timing to see where the engine made the most power. At WOT, 32 degrees of total timing and 12.7:1 air fuel netted us 278 horses at the feet. That's a solid 100hp gain (through an AOD) over Cheaper Sleeper's original bullet, thanks to a few more cubic inches, a slightly better (but still OEM 5.0 Ford) cylinder-head/intake-manifold package, and a lumpy camshaft, all of which can be scored for minimal cash outlay.