5.0 Mustang & Super FordsHow To Engine
Logan Motorsports' Three Valve Performance Swap Kit - Do The Math
Add Three-Valve Performance to 1996-2004 ’Stangs with Logan Motorsports’ Swap Kit
The ins and outs of mixing and matching Mustang engines is our focus this month. We're really excited to finally bring you details on one particular powerplant exchange that's perfect for SN-95/New Edge Ponies, which are now getting on in years and can use a bit of life support.
That's right, after covering swaps that have run the gamut from standard to a bit more exotic, we're now bringing you details on Logan Motorsports' Two- to Three-Valve exchange. It's an installation concept that we touched on in our last report on this subject ("Heavy Rotation," June 2006), but until now, have not had a chance to execute. In today's world of spendy Coyote-powered ponies, we believe this swap's relatively low cost—approximately $1,500-$19,000 for the Logan components; quality 2005-2010 engines range anywhere from $600 to $1,500—and the wide availability of suitable 'Stangs make the effort alluring.
Yes, 2011-2013 Mustang GTs are fantastic cars and their Coyote engines' aura radiates over all of the earlier late-models (1979-2010), simply because the bullet can easily be loaded into the engine bay of any one of those earlier platforms. While some enthusiasts see this adaptability as a curse for other engine swaps, Keith Logan and his son, DeWayne, of Logan Motorsports in Sycamore, Illinois (makers of killer sheet metal intake manifolds for Two-, Three-, and Four-Valve modulars), do not. And to support their position, the duo developed a complete system of parts and PCM calibration that makes supplanting the Two-Valve in SN-95 and New Edge Mustangs with a Three-Valve.
The unique concept became a reality in 2006, when a customer brought an ailing 2001 Mustang GT to the Logans. "He wanted something different," Keith explained. "So, DeWayne thought it would be interesting to put a then-current, 4.6-liter Three-Valve engine in the earlier car. We knew it would not be realistic to completely adapt all of the Three-Valve's systems, so we chose to stay with the Two-Valve's engine systems and adapt them to the newer engine."
Like Keith, we think this project is perfect for 1996-2004 'Stangs; those with non-Performance Improved 4.6-liter Two-Valve bullets, or PI Ponies with tired powertrains. With that in mind, we're making the swap with Javier Rivas' 1999 Mustang GT. This Pony is deserving of the upgrade, as it is a high-miles mash-up of both SN-95 and New Edge components that could stand such a renovation.
We turned to the crew at GTR High Performance in Rancho Cucamonga, California, for their help with executing the engine transfer. While Ricardo Topete, Eddie Zapata, and Jose Serrano are well versed in engine extracton-and-installation procedures for all years of late-model 'Stangs, the Logan Two- to Three-Valve swap is a new challenge, which the trio was anxious to take on.
Horse Sense: Fox, SN-95, New Edge, or S197. Which Mustang do you think would be the best platform to use for an Ecoboost 3.5-liter engine swap? Weigh in with your thoughts at email@example.com.
Parts Relocation Program
Our project's Three-Valve aluminum block shares the same dimensions and basic layout characteristics as their iron or aluminum Two-Valve counterparts. However, cylinder head and intake manifold differences mandate relocating the throttle cable (a new cable is included) and several important sensors from the Two-Valve setup, as their mounting locations are different on the Three-Valve.
Logan Motorsports supplies three slick aluminum brackets and adapters for mounting the new throttle body and cable. They also provide adapters for the Two-Valve's IAC and fuel-rail sensor, which are repositioned on the new engine. The conversion kit even includes the wiring for extending the TPS to the throttle body, and the fuel-rail sensor, which moves to the passenger side.