With the harness belts on...
With the harness belts on the front seats and the full rollcage, our photo car looks like a race car. However, Shelby left the audio systems, power brakes, power steering, power windows, and full amenities intact. The rear seat delete and glass front fenders subtract weight; apparently the addition of the rollcage moved the weight back up to stock. That's OK, as the plan is to make the Prudhomme Edition a street/strip player.
2009 GT500
5.0 Tech Specs
Engine and Drivetrain
Block Stock iron, 5.4-liter
Crankshaft Forged steel
Rods Cracked, forged steel I-beams
Pistons Forged aluminum
Camshafts Stock
Power Adder Kenne Bell 2.8H Twin Screw
Cylinder Heads Stock aluminum Four-Valve
Intake Manifold Cast-aluminum and air-to-water intercooler
Throttle Body Kenne Bell dual, 75mm
Mass Air Kenne Bell housing with stock electronics
Fuel System Stock with Kenne Bell Boost-A-Pumps
Exhaust Borla side exhaust
Transmission Tremec TR-6060 with Shelby shifter
Rearend Stock 8.8 with FRPP 3.73 gears
Electronics Engine Management Stock with Kenne Bell tune
Ignition Stock
Gauges Shelby gauge pod w/boost, fuel pressure, and oil pressure; MSD shift light
Chassis and Suspension
Front Suspension
K-member Stock
Control Arms Reverse-L independent
Struts QA1 90/10 adjustable
Springs 205-in-lb springs
Caster/Camber Shelby
Brakes Shelby/Baer 14-inch, vented, cross-drilled disc; Shelby/Baer six-piston, aluminum calipers
Wheels 17x5-inch Bogart Racing wheel with 26x4.5-inch
Tires 17-inch M&H Front Runner Drag tire
Rear Suspension
Shocks QA1 double adjustable
Springs FRPP with adjustable spring perches
Control Arms Solid upper-link
Brakes Shelby/Baer 14-inch, vented, cross-drilled disc; Brembo two-piston calipers
Wheels 15x10-inch Bogart Racing
Tires 28x10.5 Goodyear Eagle Dragway Special
Chassis Stiffening Eight-point rollcage