1988 Gt Coupe Engine
|
The little 306 was assembled by Jim's Uncle Ernie using an Eagle crank and rods, and TRW pistons. Being a vintage '72 302 block, the cam is a solid, flat-tappet Comp Cams item of top-secret specs. Edelbrock Performer RPM heads play host to a Victor Jr. intake with a Biggs Stage 5 750-cfm carburetor. With steep 4.88 gears out back, the car runs 10.80s as it sits. However, one of two things will happen to get the car to the 10.0s. Either the 306 will receive a gentle shot of nitrous, or Jim will install the 347 he just purchased. Ya' never know--the 347 might get installed and see a gentle shot of the good stuff. Stay tuned. View Related Article
|
|
|
|